| |
Crate Mould |
|
YOSION MOULD is the leading
Chinese crate mould manufacturer , we has developed more than 2000
sets various crate moulds such like, bottle crate mould, fish crate
mould, fruit crate mould, bread crate mould......Especially we have
done the 2 and 4 cavities crate mould and 4 cavities stacking mould.
It is suitable for high speed injection, and the speed can approach
42s. We can say, we are one of the top crate mould manufacturer in
the world.
Our question are:
• do you need a high production performance crate moulds?
• do you need the automatic ejection function for the cola bottle
crate mould?
• do you want to use the recycled plastic material to molding the
one-time using crate?
• .......
If you need all these question to be solved and clarified, please
come toYOSION Mould for crate mouldand plastic crate molding solutions! |
| How to make a long life running
crate mould? |
Choose the correct steel for mould base and mould main steel. |
| |
| to use a pre-hardened steel with HRC
bigger then 33 for mould base and choose the correct steel or material
for the durable mould components.make the correct harden treatment
to each steel piece and make the steel hardness controlled, you can
not make it too hard.And then before shipping, can make nitriding
for the sliders. Then this mold can have a mold life from 1Million
shots or running for 3years continuously. |
| |
To
make the best optimal cooling effect, for durable plastic crate
mould |
| |
We should connect the
water channel input and output as many circuit as possible. That is
mean to make the crate mold with more separate cooling connections.
For the crate mold core, design the cooling channel up to surface
15mm below the molding surface. And the diameter of the crate mold
cooling channel should be more than 12mm diameter, so that the water
can run flow smoothly in the channel while take away the heat from
the core.
For the crate mold sliders, also, make the cooling channel more close
to the crate molding area.
For the crate mold cavity cooling, also should design the best cooling
for cool down the hot runner tip area.
By doing the above mentioned design of cooling channel, you can reach
a standard crate molding cycle time around 45 to 50 seconds.
However, we have another way to improve further cooling function.
That is to apply with moldmax material for the critical area.
For example,to make the area of crate mold core top, crate mold cavity
bottom, crate mold sliders’ molding area inserted with moldmax material.
With the feature of moldmax material, the mold can fastest reach cooling
result, due to the fast heat transfer. |
| |
| Plastic crate mould design
is very important, it is better to use a mechanical system onto the
crate mould ejection, in this way, you can make the ejection action
when the mould opening. Of course, maybe your machine can work with
the 2 hydraulic acting in the same time, then you can do the ejection
when the mould opening. |
| |
| A very special hot filling
runner system is very important,especially,you will use the recycle
raw material for the one-time using crate and you want to get a high
production performance crate mould. |
| |
| This also is an very important
issue that the venting solution of plastic crate mould handle area
. as because when people carry the crate, the 2 handle area will be
the biggest force focused. If on the mould, this area’s air venting
is not perfect, there will be a very obviously jointing line. The
damage are always come from this line. |
| |
The moving area or guiding
system of crate mould must be very precise tooling processed.So any
hand working on it is not acceptable |
| |
| Types Of Crate Mold |
| |
|
|
|
|
| two cavity hot
runner vegetable crate mould with mold-max |
high spped injection vegetable
crate mould core with mold-max |
plastic fruit crate moulding |
two cavity high speed injection
bread crate mould |
|
|
|
|
| mold max cavity
of fruit crate mould |
fruite cavity mould core |
hot runner fruite crate molding
cavity |
fruit crate mould the core
with mold-max |
|
|
|
|
| plastic fruite
mould cavity |
plastic fruit crate molding
core |
fruit crate mould |
industrial Crate mould |
|
|
|
|
| plastic turnover
box mould |
plastic turnover box molding |
plastic vegetable crate mould |
vegetable basket mould |
|
|
|
|
| industrial crate
mould |
industrial crate mould |
industrial crate mould |
industrial crate mould |
|
|
|
|
| plastic bread
crate mould |
bread crate moulds |
bread crate moulds |
|
| Related:Thin
Wall Mould, |
| |
Portuguese
Japanese
German
Arabic
Spanish
Russian
French